The SYNCRO is geared up to best other big
wall harnesses with an uptick in both comfort
and mobility. Built like a sleek sport climbing
harness with skin friendly lining, rolled
top edge and essential details that make
up the difference: massive coverage, firm
& supportive foam sandwich belt and
super easy buckle adjustments.
The SYNCRO's dual "one tug" aluminium
waist buckles center your tie-in points
and belay loop to better keep you in balance
while toting big gear loads. The belt tapers
from 4 1/2 in the rear to 3 1/2 up front
for best combination of back support and
mobility. It's filled with extra firm die-punched
foam covered with athletic mesh liner and
Nylon & breathable Air Mesh outer. The
buckled 1" structural webbing wraps
the lower edge encircling the belt for ultimate
strength and confidence.
Up front - the belay loop is bright orange
3 wrap abrasion resistant polyester for
long life. Tie in points are protected with
black fabric sheath... near end of it's
life, when worn thru you'll see a "Red
Alert" warning - indicating it's time
to retire. Smart.
Just ahead of your hip bones are 2 "bendy"
soft plastic molded loops - great spot for
quick draws and a panic piece or two. At
each side is a web loop & elastic to
hold 2 racking clips and further back 2
- 7mm braided "lay flat" gear
loops. Rounding things out at center rear
is a chalk bag loop and above it a dedicated
haul loop.
Down low, the softer padded leg loops
taper from 3" at rear to 2" up
front for less bulk and are fitted with
3/4" one tug buckles for quick adjustment.
The 3/8" elastic back strap is fitted
with a convenient side-release buckle. Made
in China. Ships within North America with
FREE locking 'biner!
best: Use for gear intensive
trad routes, free walls and multi day big
wall forays. Delivered with mesh sack.
|